The Fujifilm X Series has a new top performer in the just-announced X-H1. This is the newest camera in the X Series and the first (in the series) to include 5-axis 5.5 stops in-body image stabilization (IBIS). This is also the first time the X Series will gain access to the ETERNA Film Simulation feature right out the box.
This camera rolls with 24.3 million pixels (effective pixels) with a 23.6mm×15.6mm (APS-C) X-Trans CMOS III image sensor with primary color filter. Sensitivity standard output for this camera rolls with AUTO1/2/3 (up to ISO12800) and ISO200-12800 (1/3 step). Extended output is ISO100/125/160/25600/51200.
The image stabilizer on this monster has 5-axis compensation with a compensation effect at 5.5 stops – that’s based on the CIPA standard, with pitch/yaw shake only, with the XF35mmF1.4 R lens mounted. Also the lens mount is a standard Fujifilm X mount.
As noted by Fujifilm, this is “the first internal in-body image stabilization (IBIS) system to feature in an X Series camera harnesses three axial accelerometers, three axial Gyro sensors, and a specially developed dual-processor. As a result, it realizes 5-axis image stabilization with all XF and XC lenses.” So very fancy!
Storage in this machine is a simple SD Card (-2GB) or SDHC Card (-32GB) or SDXC Card (-256GB) UHS-I / UHS-II. You can connect to this camera wirelessly with Bluetooth 4.0 or with its IEEE 802.11b / g / n wireless transmitter. A NP-W126S Li-ion battery is included with this camera and there’s a vertical power boost grip VPB-XH1 that adds a bit of bulk and grip. With this grip, two batteries may be attached.
BONUS ROUND: A couple of new X mount lenses are scheduled for release later this year that’ll also work with this new camera. These are the X mount MKX18-55mm T2.9 and MKX50-135mm T2.9 professional cinema lenses, and we’ll know more about them both soon.
More from Featured
During the recent SONA address, one of the things President Ramaphosa announced and one that struck a very good cord …